Pro1 Technologies T705 Programmable Thermostat Manual
This manual covers the following models⁚ T705. Congratulations on purchasing a new thermostat. This thermostat was designed to the highest reliability and ease of use standards. Thank you for choosing Pro1.
Introduction
The PRO1 T705 Thermostat offers a reliable thermostat at an affordable price. Our environment is important to all of us, PRO1 products are a great choice to improve the comfort of your indoor environment…best of all, you should realize a savings on your electric bill. Smart, Efficient, Eco-Friendly…quality has never been so affordable. Also Sold by the Case for Additional Savings!
The Pro1 Technologies T705 Programmable Thermostat is a user-friendly and efficient device designed to control your home’s heating and cooling systems. It features a clear LCD display, simple programming options, and a variety of features to help you save energy and money. The T705 is compatible with most single-stage heating and cooling systems. This manual provides comprehensive instructions for installing, operating, and troubleshooting your T705 thermostat.
Specifications
The PRO1 T705 Programmable Thermostat is designed for use with single-stage heating and cooling systems. It is equipped with a 4-inch LCD display with a blue backlight, providing clear visibility. The thermostat is powered by two AA alkaline batteries, offering a long lifespan. The T705 features a variety of programming options, allowing you to customize your heating and cooling schedules for optimal comfort and energy savings. The thermostat also includes a filter change reminder, ensuring optimal performance and air quality.
Here are some of the key specifications of the PRO1 T705 Programmable Thermostat⁚
- Display⁚ 4-inch LCD with blue backlight
- Power⁚ Two AA alkaline batteries
- Programming⁚ 5/1/1 day or 7-day programmable
- Features⁚ Filter change reminder, temporary and permanent hold, room temperature calibration
- Compatibility⁚ Single-stage heating and cooling systems
- Warranty⁚ 5-year limited warranty
Installation Tips
Installing the PRO1 T705 Programmable Thermostat is a straightforward process that can be completed by a homeowner with basic DIY skills. However, if you are unsure about any aspect of the installation, it is recommended to consult a qualified HVAC professional.
Here are some important installation tips to keep in mind⁚
- Location⁚ Choose a location for the thermostat that is approximately 4 to 5 feet above the floor, in an area with average temperature and good air circulation. Avoid placing the thermostat near direct sunlight, drafts, or heat sources.
- Wiring⁚ Use shielded or non-shielded 18-22 gauge thermostat wire for all connections. Make sure to correctly identify the wiring terminals on the thermostat and your existing HVAC system. It’s always a good idea to double-check the wiring diagram in the manual.
- Battery Installation⁚ Insert two AA alkaline batteries into the battery compartment. Ensure the batteries are inserted with the correct polarity, as indicated by the symbols inside the battery compartment.
- Testing⁚ After completing the installation, test the thermostat by turning on the heating or cooling system. Make sure the system is working correctly and that the thermostat is responding to temperature changes.
Thermostat Quick Reference
The PRO1 T705 Thermostat features an easy-to-use interface that allows you to quickly navigate through its functions and make adjustments as needed. Here is a quick reference guide to the thermostat’s key components and their functions⁚
- LCD Display⁚ The display shows the current room temperature, the selected setpoint temperature, the current system mode (heat, cool, or fan), and the day of the week. It also indicates hold settings, filter change reminders, and battery status.
- System Switch⁚ This switch allows you to select the desired system mode⁚ HEAT, COOL, OFF, or FAN.
- Up/Down Arrows⁚ Use these buttons to adjust the setpoint temperature.
- MENU Key⁚ Pressing this button allows you to access the thermostat’s programming menus.
- HOLD Key⁚ This key allows you to temporarily or permanently override the programmed schedule.
- TECH SET Key⁚ This key is used to access advanced settings for the thermostat.
Remember to refer to the full operating manual for more detailed information on each function and setting.
Wiring
The PRO1 T705 Thermostat is designed for easy installation and wiring. Before you begin, always disconnect power to the system for safety. Here are some important wiring considerations⁚
- Wire Type⁚ Use shielded or non-shielded 18-22 gauge thermostat wire.
- Terminal Designations⁚ When replacing an existing thermostat, carefully note the terminal connections on the old thermostat. Wiring connections may not always be color-coded.
- Battery Power⁚ The T705 thermostat is powered by batteries. This means that you’ll need to install two AA alkaline batteries (included). For optimal performance, use high-quality alkaline batteries.
- Optional 24 VAC Connection⁚ If you’re using the thermostat in battery power mode, you can opt to connect a 24 VAC common connection. This will provide a continuous power source for the thermostat.
Refer to the wiring diagram provided in the manual for detailed instructions on connecting the T705 thermostat to your HVAC system.
Features
The Pro1 Technologies T705 Programmable Thermostat is packed with user-friendly features designed to enhance your home comfort and energy efficiency. Here are some of its key highlights⁚
- Easy-to-Use Interface⁚ The T705 boasts a large, 4-square-inch display with a blue backlight, making it easy to read and navigate. The intuitive menu-driven programming system simplifies setting schedules and adjusting temperatures.
- Programmable Time Periods⁚ With four programmable time periods, you can customize your thermostat’s settings to suit your daily routine. You can set different temperatures for different times of day, ensuring optimal comfort and energy savings.
- Temporary and Permanent Hold Feature⁚ The T705 offers both temporary and permanent hold options, allowing you to override the programmed schedule for immediate temperature changes.
- Filter Change Reminder⁚ The thermostat can be configured to remind you when it’s time to change your air filter, helping you maintain optimal air quality.
- Universal Sub-Base⁚ The T705 comes with a universal sub-base that can be mounted on a wall or junction box, making installation flexible.
These features, combined with its reliable performance, make the T705 a smart choice for homeowners seeking both comfort and energy efficiency.
Wiring Diagrams
The Pro1 Technologies T705 Programmable Thermostat offers multiple wiring configurations to accommodate different HVAC system setups. Refer to the following wiring diagrams for proper installation⁚
Standard Single-Stage System⁚ This diagram depicts the typical wiring for a single-stage heating and cooling system. The thermostat utilizes the following terminals⁚
- R⁚ Red wire for the 24V power supply.
- W⁚ White wire for the heating circuit.
- Y⁚ Yellow wire for the cooling circuit.
- G⁚ Green wire for the fan control.
- C⁚ Common wire for the 24V power supply.
Heat Pump System⁚ For heat pump systems, the T705 may require additional terminals like O/B (for auxiliary heat) and possibly a second cooling terminal (Y2). Refer to the specific wiring diagram provided in the manual for your particular heat pump setup.
Important Note⁚ Always ensure the power to the HVAC system is disconnected before connecting the T705. Consult a qualified HVAC technician if you are unsure about the proper wiring procedures.
Tech Settings
The Pro1 Technologies T705 Programmable Thermostat offers a variety of technical settings that allow for fine-tuning the system’s operation to optimize comfort and efficiency. These settings are accessed through the “TECH SET” menu, usually reached by pressing a dedicated button on the thermostat or navigating through the menu options.
Here are some common technical settings found in the T705⁚
- Compressor Delay⁚ This setting allows you to configure a minimum run time for the compressor, typically ranging from 3 to 5 minutes. This helps prevent short cycling of the compressor, prolonging its lifespan.
- Room Temperature Calibration⁚ This setting allows you to adjust the thermostat’s temperature reading to match the actual room temperature. This is useful if the thermostat’s sensor is slightly off.
- Filter Change Reminder⁚ If enabled, the T705 can be programmed to remind you when it’s time to change the air filter. This helps maintain optimal airflow and efficiency.
- System Type⁚ This setting allows you to select the type of HVAC system you have, such as single-stage heating/cooling, heat pump, or multi-stage system.
Consult the T705 manual for detailed explanations of each technical setting and their specific functions. Always refer to the manufacturer’s instructions for proper configuration and operation.
Reference
The Pro1 Technologies T705 Programmable Thermostat is designed to provide convenient and reliable temperature control for your home. For comprehensive information and assistance, Pro1 Technologies offers various resources for users of the T705.
The Pro1 website, www.pro1iaq.com, provides a wealth of information about their products, including the T705. You can find user manuals, installation guides, troubleshooting tips, and frequently asked questions (FAQs) on their website. For immediate support, you can contact Pro1 Customer Care toll-free at 888-Pro1iaq (776-1427) during normal business hours (Monday-Friday, 9 AM ─ 6 PM Eastern);
You can also find helpful resources and discussions about the T705 on online forums and communities dedicated to HVAC and home automation. These platforms can offer insights from other users and expert advice on programming, troubleshooting, and best practices for using the T705;
Warranty Information
Your new Pro1 T705 Programmable Thermostat comes with a 5-year limited warranty. This warranty covers defects in materials and workmanship under normal use and service conditions. The warranty period begins on the date of purchase and is valid for the original purchaser only.
To register your T705 thermostat, please visit Pro1’s website at www.pro1iaq.com. Registration helps ensure you receive timely updates and support throughout the warranty period. If you encounter any problems with your thermostat during the warranty period, contact Pro1 Customer Care at 888-Pro1iaq (776-1427). They will be able to assist you with troubleshooting and repair options.
The warranty does not cover damage caused by improper installation, misuse, neglect, accident, or unauthorized modification. It also excludes damage resulting from natural disasters, power surges, or other external factors. Please consult the complete warranty document for detailed information and exclusions.
Troubleshooting
If you are experiencing issues with your Pro1 T705 Programmable Thermostat, there are a few troubleshooting steps you can try before contacting customer support. First, check the battery level. If the battery icon is displayed, replace the batteries with fresh alkaline batteries. Next, ensure the thermostat is properly mounted and securely connected to the wall.
If the thermostat is not displaying any information or responding to button presses, try resetting it by removing the batteries for a few minutes and then reinserting them. If the thermostat is still not working, check the circuit breaker that controls your HVAC system. Ensure the breaker is in the on position.
If none of these steps resolve the issue, you can contact Pro1 Customer Care for further assistance. They can help you diagnose the problem and provide guidance on how to fix it. Remember to have your thermostat model number available when contacting customer support.
Programming the Thermostat
Programming your Pro1 T705 Thermostat is a straightforward process that allows you to customize your heating and cooling schedule for optimal comfort and energy savings. To begin, locate the “MENU” button on your thermostat and press it once. You will see a “TECH SET” option appear on the display.
Press the “MENU” button again to access the “TECH SET” menu. From here, you can navigate to the “SET TIME” option to adjust the current time and day of the week. Use the up and down arrow buttons to cycle through the available options and press the “MENU” button to confirm your selections.
Once the time is set, you can proceed to program your desired heating and cooling setpoints for each day of the week. The thermostat provides four programmable time periods, allowing you to set different temperatures for different parts of the day. Refer to the “Set Program Schedule” section of this manual for detailed instructions on programming your thermostat.